news
Pneumatic Clamp
Pneumatic Clamp
pneumatic clamp
The pneumatic toggle-action clamp is designed for applications where it is necessary to clamp workpieces from above, such as in transfer lines, machine tools or special equipment pneumatic clamp The pneumatic power clamp can be operated with standard pressure compressed air. It has a large swivel angle to allow the clamping arm to rotate freely and ensure optimum accessibility to the workpiece. The block design of the housing offers universal fastening options, allowing the swing clamp to be aligned perfectly to the application.
These robust and high-performance clamps have a high opening and closing travel ratio thanks to the toggle system principle pneumatic clamp This allows a large number of clamps to be actuated simultaneously or in a specified order. It also enables a high clamping force to be achieved with low air consumption. GN 962 heavy-duty pneumatic toggle clamps have a reinforced body and a hardened and ground bearing pin, ensuring long service life. They can also be equipped with electric end position feedback for the automatic control of a clamping process.
norelem also supplies vertical pneumatic clamps with a horizontal or a vertical cylinder pneumatic clamp These have higher holding and clamping forces, making them particularly suitable for installation into specialised machines and handling plants. The maintenance-free operation of these clamps is ensured by tempered and ground bearings in Teflon bearings. The clamping screws are secured with LOCTITE, which prevents them from loosening as a result of vibrations or impacts.
The pneumatic power clamp is ideally suited for use as an actuator in combination with a servo or robot. In this way, it can be automatically controlled by an integrated machine tool controller. The cylinder can be powered directly from the machine control, so no additional electrical wiring is required.
pneumatic clamp
0users like this.
